Skyjack SJ6826 RT, SJ6832 RT Rough Terrain Scissor Lift Service Manual
171 pages · Publication 143899AF
Fast free USA shippingShips in 1 business daySave 10% on 2 manuals, 15% on 3 or morePay by credit or debit card or with PayPal. No PayPal account needed.
Added to your cart. View cart
What's inside
From the manual's own table of contents: 33 sections, 219 entries. See sample pages (PDF, 735 KB)
Section 1 - Scheduled Maintenance
Section 5 - Procedures
Operator’s Responsibility for Maintenance20 topics
- Aerial Platform Definition
- Purpose of Equipment
- Use of Equipment
- Manuals
- Operating
- Service & Maintenance
- Operator
- Service Policy and Warranty
- Optional Accessories
- Scope of this Manual
- Operator Safety Reminders
- Electrocution Hazard
- Safety Precautions
- Maintenance and Inspection Schedule
- Owner’s Annual Inspection Record
- Replacement Parts
- Maintenance and Service Safety Tips
- Hydraulic System & Component Maintenance and Repair
- Maintenance Hints
- Railing Maintenance and Repair
Service and Maintenance4 topics
- About this Section
- Service Bulletins
- Maintenance and Inspection
- Maintenance Instructions
Table 1.1 Owner’s Annual Inspection Record
Scheduled Maintenance3 topics
- Table 1.2 Maintenance and Inspection Checklist
- Scheduled Maintenance Inspections
- Function Tests
Table 2.1a Specifications and Features - ANSI/CSA
Table 2.1b Specifications and Features - CE
Table 2.1c Specifications and Features - AS
Table 2.2a Floor Loading Pressure - ANSI/CSA
Table 2.2b Floor Loading Pressure - CE
Table 2.2c Floor Loading Pressure - AS
Table 2.3a Maximum Platform Capacities (Evenly Distributed) - ANSI/CSA
Table 2.3b Maximum Platform Capacities (Evenly Distributed) - CE
Table 2.3c Maximum Platform Capacities (Evenly Distributed) - AS
Table 2.4 Rough Terrain Scissor Fluids
Table 2.5 Torque Specifications
Charts2 topics
- Hydraulic Symbol Chart
- Electrical Symbol Chart
Parts List2 topics
- Hydraulic Schematic Parts List
- Electrical Parts List
Diagrams and Schematics23 topics
- Hydraulic Schematic
- Hydraulic Manifolds And Ports Identification
- Control Box Diagram - With All Options
- Outrigger/Hydraulic Generator Control Console Wiring
- Scissor Arm Control Cable
- Main Manifold Harness Wiring Diagram - ANSI/CSA
- Main Manifold Harness Wiring Diagram - CE
- Load Sensing Harnesses
- Engine Wiring Diagram - Dual Fuel System (Kubota Engine)
- 3.14a. Engine Wiring Diagram - Diesel Fuel System (Kubota Engine)
- 3.14b. Engine Wiring Diagram - Diesel Fuel System (Kubota Engine)
- Outrigger Optional Harness Diagram
- Hydraulic Generator Electrical Panel Assembly
- Electrical Panel Wiring Diagram - Terminal Block Details
- Flashing Light Relay Harness
- Electrical Panel Wiring Diagram (ANSI/CSA)
- Electrical Panel Wiring Diagram (CE)
- Electrical Schematic - ANSI/CSA (No Option With Kubota Dual Fuel Engine)
- Electrical Schematic - ANSI/CSA (All Option With Kubota Dual Fuel Engine)
- 3.23a. Electrical Schematic - ANSI/CSA (All Option With Kubota Diesel Engine)
- 3.23b. Electrical Schematic - ANSI/CSA (All Option With Kubota Diesel Engine)
- 3.24a. Electrical Schematic - CE (All Option With Kubota Diesel Engine)
- 3.24b. Electrical Schematic - CE (All Option With Kubota Diesel Engine)
Electrical System52 topics
- 4.1-1 All Controls Inoperative
- 4.1-2 No Power To Platform
- 4.1-3 All Functions Inoperative (Machines Equipped with Load Sensing System) (CE)
- 4.1-4 All Functions Inoperative from The Platform
- 4.1-5 Engine Will Not Crank from Platform or Base Control Console
- 4.1-6 Engine Cranks But Will Not Start - Kubota Diesel
- 4.1-7 Engine Cranks But Will Not Start - Kubota Dual Fuel
- 4.1-8 Glow Plugs Inoperative from Engine Controls or Platform (Diesel Models)
- 4.1-9 Choke Inoperative from Engine Controls or Platform (Kubota Dual Fuel)
- 4.1-10 High Throttle Inoperative
- 4.1-11 High Throttle On Demand Inoperative (Kubota Dual Fuel)
- 4.1-12 Drive and Steer Inoperative (Machines without outriggers option)
- 4.1-13 Drive and Steer Inoperative (Machines with outriggers option)
- 4.1-14 Brakes Will Not Release
- 4.1-15 Steer Right Inoperative
- 4.1-16 Steer Left Inoperative
- 4.1-17 Reverse Drive Inoperative
- 4.1-18 Forward Drive Inoperative
- 4.1-19 First Drive Speed and Steering Inoperative
- 4.1-20 Second Drive Speed Inoperative
- 4.1-21 Third Drive Speed Inoperative
- 4.1-22 High Drive Speed Inoperative
- 4.1-23 Up Circuit Inoperative from Platform
- 4.1-24 Up Circuit Inoperative from Base Control Console
- 4.1-25 Up Circuit Inoperative from Platform or Base Control Console (without Outriggers)
- 4.1-26 Platform will Not Lift from Platform or Base Control Console with Outriggers Retracted (Lift Operates Correctly w
- 4.1-27 Platform will Not Lift from Platform or Base Control Console with Outriggers Extended
- 4.1-28 Platform will Not Lift from Platform or Base Control Console with Outriggers Extended or Retracted
- 4.1-29 Down Circuit Inoperative from Platform
- 4.1-30 Down Circuit Inoperative from Base
- 4.1-31 No Down Function (Additional for machines with Load Sensing System) (CE)
- 4.1-32 Hydraulic Generator Inoperative
- 4.1-33 Hydraulic Generator will not Shut Off from Generator Switch
- 4.1-34 All Outriggers Inoperative (Auto-Level and Manual)
- 4.1-35 All Outriggers Inoperative (Auto-Level and Manual from Platform Controls)
- 4.1-36 All Outriggers Inoperative (Base Controls only)
- 4.1-37 All Outriggers Inoperative (Auto Level only)
- A: Led Power Indicator Light at Outrigger Control Module (OCM1) Not On (Constant)
- 4.1-38 All Outriggers Inoperative (Auto Level only)
- B: Led Power Indicator Light at Outrigger Control Module (OCM1) Flashing
- 4.1-39 Left Front Outrigger Inoperative Manually
- 4.1-40 Right Front Outrigger Inoperative Manually
- 4.1-41 Right Rear Outriggers Inoperative Manually
- 4.1-42 Left Rear Outriggers Inoperative Manually
- 4.1-43 Individual Outrigger Functions Inoperative (Auto-Level)
- 4.1-44 Auto-Level Inoperative
- 4.1-45 Auto All Up Inoperative (Retract)
- 4.2-1 All Functions Inoperative
- 4.2-2 Steering Inoperative
- 4.2-3 Lift, Steer and First Drive Speed Inoperative
- 4.2-4 Second Drive Speed Inoperative
- 4.2-5 Drive Inoperative
Hydraulic System48 topics
- 4.2-6 Drive Sluggish
- 4.2-7 Reverse Drive Inoperative
- 4.2-8 Forward Drive Inoperative
- 4.2-9 Drive Inoperative When in Low Drive
- 4.2-10 Drive Inoperative When in High Drive
- 4.2-11 Brakes Will Not Release
- 4.2-12 Up Circuit Inoperative
- 4.2-13 Down Circuit Inoperative
- 4.2-14 Hydraulic Generator Inoperative
- 4.2-15 All Outriggers Inoperative
- 4.2-16 Left Front Outriggers Inoperative
- 4.2-17 Right Front Outriggers Inoperative
- 4.2-18 Right Rear Outriggers Inoperative
- 4.2-19 Left Rear Outriggers Inoperative
- 4.2-20 Outriggers Drift In
- Load sense system flash codes
- 4.3-1 Flash Code F01: Check HWFS
- 4.3-2 Flash Code F02: Not Ground Mode
- 4.3-3 Flash Code F03: Not Stopped
- 4.3-4 Flash Code F04: Tilted
- 4.3-5 Flash Code F05: Bad Height
- 4.3-6 Flash Code F06: Check Elev
- 4.3-7 Flash Code F08: Check Elev
- 4.3-8 Flash Code F09: Bad Height
- 4.3-9 Flash Code F10: Bad Height
- 4.3-12 Flash Code F13: Low Height Range
- 4.3-13 Flash Code F14: Bad Height
- 4.3-14 Flash Code F15: Check Elev
- 4.3-15 Flash Code F16: Low Elev.open
- 4.3-16 Flash Code F17: High Elev.open
- 4.3-17 Flash Code F18: Low Elev.close
- 4.3-18 Flash Code F19: High Elev.close
- 4.3-23 Flash Code F24:Too Many
- 4.3-24 Flash Code F25:Check Elev
- 4.3-25 Flash Code F26:Check Elev
- 4.3-26 Flash Code F27:Bad Height
- 4.3-27 Flash Code F30:Bad Heights
- 4.3-28 Flash Code F31:Reject Curve
- 4.3-29 Flash Code F32:Reject Curve
- 4.3-30 Flash Code F33:Reject Curve
- 4.3-31 Flash Code F34:Reject Curve
- 4.3-32 Flash Code F40:Reject Delta
- 4.3-33 Flash Code F42:Low Pressure
- 4.3-34 Flash Code F43:High Pressure
- 4.3-35 Flash Code F44:Low Pressure
- 4.3-36 Flash Code F45:High Pressure
- 4.3-37 Flash Code F46:Check Elev
- 4.3-38 Flash Code F47:Check Elev
General1 topic
- 5.1-1 Safety and workmanship
Platform2 topics
- 5.2-1 Adjust the gate spring hinge
- 5.2-2 Platform mounting hardware
Show all 33 sections
Base5 topics
- 5.3-1 Torque the wheel bolts and nuts
- 5.3-2 Install and torque the wheels
- 5.3-3 Tighten the wheel nut
- 5.3-4 Electronic tilt switch setup procedure
- 5.3-5 Adjust the system lift and pressure
Hydraulics4 topics
- 5.4-1 Drive circuit flush procedure
- 5.4-2 Drive motor test
- 5.4-3 System pressure test
- 5.4-4 Drive pressure test
Outriggers1 topic
- 5.5-1 Outrigger mechanical limit switch wiring diagram
Control Modules Identification and Locations2 topics
- 5.6-1 Identification
- 5.6-2 Locations
EZcal Diagnostic Tool4 topics
- 5.7-1 Hand held EZcal calibration and diagnostic tool key functions
- 5.7-2 Flash the controller
- 5.7-3 Outrigger codes
- 5.7-4 Curve/group codes
Auto-leveling Outrigger PC Board1 topic
- 5.8-1 Auto-leveling outrigger PC board layout
GP-102 (CM1) Control Module5 topics
- 5.9-1 Set up the GP-102 load sense controller
- 5.9-2 GP-102 Load sense controller pin reference table
- 5.9-3 LED Error codes - quick reference chart
- 5.9-4 LED Error codes - code breakdown chart
- 5.9-5 Control module load calibration - code messages & definitions
GP-106 (OCM1) Control Module5 topics
- 5.10-1 Outrigger control module (GP-106/OCM1) instructions
- 5.10-2 Auto-leveling outrigger settings and error codes
- 5.10-3 Auto-leveling outrigger error code breakdown
- 5.10-4 Set up the GP-106 outrigger controller
- 5.10-5 GP-106 Outrigger controller pin reference table
GP-108 Control Module2 topics
- 5.11-1 Set up the GP-108 overload/outrigger controller
- 5.11-2 GP-108 Overload/outrigger controller pin reference table
Inside this manual
Real pages from this service manual (171 pages). Open the sample pages (PDF, 734 KB)
- Specifications, page 43: SKYJACK, Page 42
- Diagram, page 57: SKYJACK, Page 56
- Troubleshooting, page 157: SKYJACK, Page 156
- Color page, page 48: SJRT Compact Series
- Color page, page 87: SKYJACK, Page 86
- Foldout diagram (color), page 83: SECTION 3, Page 82
Other manuals for this machine
Save 10% on 2 manuals, 15% on 3 or more. Other manuals for the SJ6826 RT, SJ6832 RT are listed below. Editions cover different serial number ranges: check the serial coverage and tick only the ones that match your machine.
This manual: Service Manual 143899AF$69.61
Added to your cart. View cart
This is a service manual
Here's how it compares to the other manual types.
This manual
Service manual
Factory repair procedures and technical information such as specifications, troubleshooting, and wiring and hydraulic diagrams, for the models and systems the manual covers. See What's inside for its topics.
Operator's manual
Safe operation, controls, maintenance schedules, lubrication points, inspections, and basic checks. Repair procedures are in the service manual.
Parts manual
Illustrated diagrams with factory part numbers for identifying components and ordering parts. Repair procedures are in the service manual.
Engine service manuals are sometimes sold separately, since certain machine models were offered with more than one engine option.
What it's used for
Factory manual for in-house farm and construction shop use. Straightforward, complete, and easy to follow. It contains the OEM information dealership service departments and parts counters use to diagnose problems, identify components, and perform maintenance or repairs correctly.
Service shops and owner/operators who repair their own equipment
Identifying correct parts and seeing how assemblies come apart and go back together
Keeping equipment running with less downtime
Factory manual, 171 pages
Quantity one is the manual described above.
Fast free USA shipping
Ships in 1 business day.
60-day returns
Free if the mistake is ours. A manual ordered in error must come back unopened in its shrink-wrap; you pay return shipping and a 20% restocking fee applies. Return policy
Other editions and similar models
Questions about model, serial number, engine coverage or contents? Contact us before purchasing and we'll help confirm it's the right manual. Please verify the manual type, machine model, serial number range and engine coverage before purchasing: manuals ordered in error carry a 20% restocking fee (return policy).